Related Experiment Video
Updated: Sep 30, 2025

Analysis of SEC-SAXS data via EFA deconvolution and Scatter
Published on: January 28, 2021
Comparison of Empirical Mode Decomposition and Singular Spectrum Analysis for Quick and Robust Detection of
Mateusz Stajuda1, David García Cava1, Grzegorz Liśkiewicz2
1School of Engineering, Institute for Infrastructure and Environment, University of Edinburgh, Thomas Bayes Road, Edinburgh EH9 3FG, UK.
Abstract:
Aerodynamic instabilities in centrifugal compressors are dangerous phenomena affecting machine efficiency and in severe cases leading to failure of the compressing system. Quick and robust instability detection during compressor operation is a challenge of utmost importance from an economical and safety point of view. Rapid indication of instabilities can be obtained using a pressure signal from the compressor. Detection of aerodynamic instabilities using pressure signal results in specific challenges, as the signal is often highly contaminated with noise, which can influence the performance of detection methods. The aim of this study is to investigate and compare the performance of two non-linear signal processing methods-Empirical Mode Decomposition (EMD) and Singular Spectrum Analysis (SSA)-for aerodynamic instability detection. Two instabilities of different character, local-inlet recirculation and global-surge, are considered. The comparison focuses on the robustness, sensitivity and pace of detection-crucial parameters for a successful detection method. It is shown that both EMD and SSA perform similarly for the analysed machine, despite different underlying principles of the methods. Both EMD and SSA have great potential for instabilities detection, but tuning of their parameters is important for robust detection.
More Related Videos
Related Concept Videos
IR Spectrum Peak Splitting: Symmetric vs Asymmetric Vibrations
Wind Turbine Machine Models
Induction machines interact through the rotating magnetic field generated by the stator and the rotor. The key parameter is slip, which is the difference between synchronous speed and rotor speed relative to synchronous speed. Slip is...
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
¹³C NMR: ¹H–¹³C Decoupling
A broadband decoupling technique is used to simplify these complex, sometimes overlapping, signals. Broadband decoupling relies on a...
¹³C NMR: Distortionless Enhancement by Polarization Transfer (DEPT)
Forced Oscillations

