Operational parameters optimization for remediation of crude oil-polluted water in floating treatment wetlands using...

The application of floating treatment wetlands (FTWs) is an innovative nature-based solution for the remediation of polluted water. The rational improvement of water treatment via FTWs is typically based on multifactorial experiments which are labor-intensive and time-consuming. Here, we used the response surface methodology (RSM) for the optimization of FTW's operational parameters for the remediation of water polluted by crude oil. The central composite design (CCD) of RSM was used to generate the experimental layout for testing the effect of the variables hydrocarbon, nutrient, and surfactant concentrations, aeration, and retention time on the hydrocarbon removal in 50 different FTW test systems planted with the common reed, Phragmites australis. The results from these FTW were used to formulate a mathematical model in which the computational data strongly correlated with the experimental results. The operational parameters were further optimized via modeling prediction plus experimental validation in test FTW systems. In the FTW with optimized parameters, there was a 95% attenuation of the hydrocarbon concentration, which was very close to the 98% attenuation predicted by the model. The cost-effectiveness ratio showed a reduction of the treatment cost up to $0.048/liter of wastewater. The approach showed that RSM is a useful strategy for designing FTW experiments and optimizing operational parameters.