Related Experiment Video
Updated: Sep 30, 2025

Interactive and Visualized Online Experimentation System for Engineering Education and Research
Published on: November 24, 2021
Linear active disturbance rejection control of servo systems via IMC principle with active damping and sliding mode
Ping Li1, Kaiqi Guo1, Mingming Zhang1
1Department of Biomedical Engineering, Southern University of Science and Technology, 1088 Xueyuan Ave, Nanshan District, Shenzhen, 518055, China.
Abstract:
In this paper, a new linear active disturbance rejection control (LADRC) is proposed for servo systems based on active damping (AD), internal model control (IMC) and sliding mode control (SMC). The IMC rules are applied to tune the controller gains for a prescribed tracking performance. The AD method injects a virtual damping force into the motion system to actively attenuate disturbances. By deriving the sliding dynamics of IMC, a boundary layer solution of SMC is employed to enhance the robustness of control system. As the improved robust IMC scheme is applied as the controller of LADRC, the uncompensated disturbance of linear extended state observer can be better suppressed. With this method, a higher tracking control accuracy is expected to be obtained in the presence of uncertain dynamics. Theoretical stability was analyzed based on the Lyapunov method. Comparative experiments were conducted on a permanent magnet synchronous motor to validate the superiority of the proposed approach.
More Related Videos
06:45Design and Application of a Fault Detection Method Based on Adaptive Filters and Rotational Speed Estimation for an Electro-Hydrostatic Actuator
Published on: October 28, 2022
11:53The Modular Design and Production of an Intelligent Robot Based on a Closed-Loop Control Strategy
Published on: October 14, 2017
Related Concept Videos
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Second Order systems I
By reinterpreting the system, one can derive the closed-loop transfer function, which...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Control Systems
At the heart...