Municipal solid waste generation and its compositional assessment for efficient and sustainable infrastructure...

It is imperative to design and operate sustainable solid waste management (SWM) systems in cities based on the results of waste amount and characterization study (WACS). In this work, WACS was conducted and results were used to design an SWM system for an intermediate city of Pakistan. The study revealed that about 110 tons of solid waste per day is generated with a per capita rate of 0.337 kg/day. Around 51.2% of mixed municipal solid waste (MSW) is organic in nature and its non-scientific disposal is resulting in higher greenhouse gas (GHG) emissions. It was also found that more than 80% of valuables are taken away by the informal sector during the transfer of MSW from the generation source to the dumping site. Ultimate analyses showed that the moisture content (MC) and carbon to nitrogen (C:N) ratio were 64.23% and 51.14%, respectively. Proximate analysis revealed that moisture and calorific values were 57 % and 3505 BTU/lb., respectively. Based on these results, a material sorting facility (MSF) was proposed, with an estimated investment cost of US $3.64 million. However, the efficiency of the existing collection system is limited to 32 % only. In order to improve the collection efficiency (>90 %), an additional investment of US $1.638 million was estimated with an operations and maintenance (O&M) cost of US $19.25 per ton. Existing non-scientific MSW disposal practices contribute 32,079.61 CO₂e tons/year of GHG emissions. The proposed MSF followed by composting is estimated to reduce GHG emissions by 38% to 19,722.38 CO₂e tons/year.