Related Experiment Video
Updated: Sep 29, 2025

Rejection of Fluorescence Background in Resonance and Spontaneous Raman Microspectroscopy
Published on: May 18, 2011
A packaged food internal Raman signal separation method based on spatially offset Raman spectroscopy combined with
Zhenfang Liu1, Min Huang1, Qibing Zhu1
1Key Laboratory of Advanced Process Control for Light Industry (Ministry of Education), Jiangnan University, Wuxi, 214122, China.
Abstract:
Raman spectroscopy attempts to reflect food quality by characterizing molecular vibration and rotation. However, the blocking of optical signals by packaging materials and the interference of the optical signal generated by the packaging itself make the detection of internal food quality without destroying packaging highly difficult. In this regard, this paper proposes a novel packaged food internal signal separation based on spatially offset Raman spectroscopy (SORS) coupled with improved fast independent component analysis (FastICA). Firstly, the Raman scattering image of the packaged food with offset laser incident point was obtained. Then, the movable quadratic mean of information entropy was used to select the observation feature region of the image. Thirdly, the main independents decomposed by the optimized FastICA method were identified by spectral attenuation characteristics of the SORS peak signal. Finally, the non-negativity of the separated signal was ensured by baseline recognition and correction. The effectiveness of this method was verified by refactoring the similarity between the signal and the reference signal by testing three different packaging and four internal materials under standard experimental conditions. The applicability of the method was proved by the internal signal separation of three packaged foods on sale. The experimental results indicate that the proposed method can separate the Raman signal of packaged food and can be used as a pretreatment method and auxiliary analysis means for the detection of packaged food.
Related Concept Videos
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
Raman Spectroscopy: Overview
However, a small fraction of the scattered light exhibits a frequency shift due to the exchange of energy between the incident photons and...

