A Cadaveric Study Addressing the Feasibility of Remote Patient Monitoring Prosthesis for Total Knee Arthroplasty

Since the COVID-19 pandemic of 2020, there has been a marked rise in the use of telemedicine to evaluate patients after total knee arthroplasty (TKA). The purpose of our study was to assess a novel stem with an embedded sensor that can remotely and objectively monitor a patient's mobility after TKA.

A single anatomically designed knee system was implanted in concert with an interconnected tibial stem extension containing 3D accelerometers, 3D gyroscopes, a power source, and a telemetry transmission capability in 3 cadaveric pelvis to toe specimens. The legs were moved by hand to preset tibial positions at full knee extension, midflexion, flexion, and back to midflexion and extension for a total of 16 trials across 6 knees.

Sensor data were successfully transmitted with good quality of signal to an external base station. Good correlation to the range of motion of the tibia was found (mean error 0.1 degrees; root mean square error 3.8 degrees). The signal from the heel drop tests suggests the sensor could detect heel strike during activities of daily living in vivo and the potential for additional signal processing to analyze vibratory and motion patterns detected by the sensors. A frequency domain analysis of a properly cemented and poorly cemented implant during the heel drop test suggests a difference in accelerometer signal in these implant states.

The results confirm signals generated from an embedded TKA sensor can transmit through bone and cement, providing accurate range of motion data and may be capable of detecting changes in prosthesis fixation remotely.