Related Experiment Video
Updated: Sep 29, 2025

Ultrasonic Fatigue Testing in the Tension-Compression Mode
Published on: March 7, 2018
Research on Dynamic Performance of CRTSⅢ Type Slab Ballastless Track under Long-Term Service
Zhiping Zeng1,2, Yancai Xiao1, Weidong Wang1,2
1School of Civil Engineering, Central South University, Changsha 410075, China.
Abstract:
To fill the blank in the research on the dynamic performance of track structure under long-term service, the dynamic response study of China Railway Track System Ⅲ type slab ballastless track (CRTSIII SBT) under the action of fatigue for 30 million times and the parting between track slab and self-compacting concrete (SCC) was carried out. By establishing the finite element model of the CRTSIII SBT structure and taking the stiffness change of isolation layer and fastener under fatigue state and the parting during service as the research objects, combined with the full-scale model test, the dynamic response amplitude and vibration law of track structure was analyzed based on the finite element model of axle falling test method. The results show the following: (1) Under the fatigue load, the acceleration of rail and base increases obviously, the longitudinal tensile stress of SCC surface decreases, the longitudinal tensile stress of base surface increases, and the vertical stress of each layer of track structure increases as well. (2) Under the action of the parting, the dynamic response of each structural layer increases, and the change of acceleration and stress of each layer under the action point of axle falling is the most obvious. (3) The fatigue load will weaken the vibration damping performance of the track, and the parting will continue to develop under the action of the falling axle, resulting in partial or total failure of the SCC layer. Both of them will aggravate the dynamic response of the track structure and affect driving safety, which should be paid attention to during maintenance.
Related Concept Videos
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...
Cable Subjected to Concentrated Loads
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Fatigue Strength of Concrete
Cable Subjected to a Distributed Load
Slump Test
Concrete is poured into the mold in three layers to conduct the test. Each layer is compacted 25 times with a steel tamping rod, which has a five-eighths-inch diameter and a rounded end, to ensure even distribution and eliminate...

