Processing and Mechanical Properties of Basalt Fibre-Reinforced Thermoplastic Composites

Basalt fibre is derived from volcanic rocks and has similar mechanical properties as glass fibre. However, poor fibre-matrix compatibility and processing issues are the main factors that have restricted the mechanical performance of basalt fibre-reinforced thermoplastic composites (BFRTP). In this work, basalt continuous fibre composites with polypropylene (PP) and polycarbonate (PC) matrices were studied. The composites were processed by compression moulding, and a processing study was conducted to achieve good quality composites. For the BF-PC composites, the optimisation of material preparation and processing steps allowed the polymer to impregnate the fibres with minimal fibre movements, hence improving impregnation and mechanical properties. For BF-PP composites, a compatibiliser was required to improve fibre-matrix compatibility. The compatibiliser significantly improved the tensile and impact strength values for short BF-PP composites and continued to increase at 40 wt%. Furthermore, the analytical modelling of the Young's moduli indicated that the induced fibre orientation during processing for short BF-PP composites and unidirectional (UD) BF-PC composites had better stress transfer than that of UD BF-PP composites.