Prompt Inactivation of Coronavirus Using a 280 nm Light-Emitting Diode Cluster Device

We report on the development and characterization of a UV-C light-emitting diode (LED) 280 nm cluster prototype device designed for the rapid disinfection of SARS-CoV-2 coronaviruses. The device was evaluated against the Betacoronavirus mouse hepatitis virus-3 strain, and its virucidal capacity was probed as a function of different applied UV-C doses versus different situations concerning irradiation distances. UV-C LEDs are light emitters that offer advantages over low-pressure mercury lamps, such as quasimonochromaticity, lower electrical power consumption, instant on/off with the instant full-power operation, unlimited on/off cycles for disinfection schemes, and a much longer lifetime operation, in addition to portability aspects, as well as UV-C LEDs do not contain heavy metal in its composition such as mercury, found in ultraviolet germicidal irradiation (UVGI) lamps. This novel device reached a 99.999% elimination rate at a distance of 9 cm at all the tested irradiation times (dose dependence), demonstrating that it took only 30 sec to achieve this inactivation rate. Its virucidal effectivity in rapid virus inactivation was demonstrated. We conclude that the HHUVCS cluster device (λ = 280 nm) provides a rapid virucidal effect against the SARS-CoV-2 coronavirus. The current research should encourage further advances in UV-C LED-based devices designed for the inactivation of SARS-CoV-2 virus on surfaces, in air, and in liquids.