Elucidation the influence of design variables on coagulation-flocculation mechanisms in the lab-scale bio-coagulation...

Bio-coagulants are environmentally friendly substances that have shown potential in removing organic and inorganic contaminants from wastewater from the Imitation Paint Industry. Under the optimized conditions, the use of the three bio-coagulants (of plant origin), Strychnos potatorum, Cactus opuntia and Portunus sanguinolentus (crab) shell (of animal origin) were evaluated, and their removal mechanism was based on kinetic models and adsorption isotherms. The error analysis method was used to find the best isotherm fit. In addition, the kinetic model parameters showed the absence of chemisorption and confirmed the existence of pore diffusion. The interaction between coagulant and pollutant, the type, homogeneity and intensity of the coagulation process, the pollutant absorption capacity of the coagulant were evaluated with the aid of the adsorption isotherm models. From the Pseudo first-order kinetic model an equilibrium pollutant uptake (mg/g) was marked as 598, 554 and 597 for Strychnos potatorum, Cactus opuntia and Portunus sanguinolentus respectively. The better affinity between the pollutants and the bio coagulants were observed through the lower values of Langmuir isotherm constant k_L. The adsorption intensity from Freundlich model (n_F) were ranged between 1 and 10 for all the listed coagulants, which revealed the physisorption behavior and heterogeneous mechanism of removal. With these results, it would be possible to conduct scale-up studies to adopt the process for practical systems.