Effect of Laser Remelting Strategy on the Forming Ability of Cemented Carbide Fabricated by Laser Powder Bed Fusion...

Due to the high degree of design freedom and rapid prototyping, laser powder bed fusion (L-PBF) presents a great advantage in the super-hard cemented carbide compared with conventional methods. However, optimizing processing parameters to improve the relative density and surface roughness is still a challenge for cemented carbide fabricated by L-PBF. For this, the effect of the remelting strategy on the forming quality of the L-PBF processed cemented carbide was studied in this article, aiming to explore a suitable process window. The surface quality, relative density, microstructure, and microhardness of the cemented carbide parts fabricated under a single melting and remelting strategy were compared. The results showed that the remelting strategy could efficiently improve the specimens' surface quality and relative density. Besides, the cracks were not obviously aggravated, and the WC grains could distribute more homogeneously on the binder matrix under the remelting strategy. Therefore, the microhardness showed an improvement compared to the single melting strategy.