Related Experiment Video
Updated: Sep 27, 2025

Application of Light-cured Dental Adhesive Resin for Mounting Electrodes or Microdialysis Probes in Chronic Experiments
Published on: July 30, 2007
[Should a metal post always be replaced before a new indirect -restoration?]
Abstract:
Before realizing a new indirect restoration on an endodontically treated tooth, present restorations and possible posts need to be assessed. In the case of a metal post, the mismatch in flexural modulus between the dentine and the post might increase the risk of a vertical root fracture. Is it therefore prudent to replace such a metal post, before the fabrication of a new indirect restoration? Two scenarios might be considered to answer this question. First, would a glass fibre post result in a lower risk of failure? Two systematic reviews of the literature comparing glass fibre and metal posts for the short term were contradictory. Second, is the occurrence of a vertical root fracture associated with the presence of a post? Such association could not be established either. On the basis of the current literature, there does not appear to be evidence to support actively replacing a metal post.
More Related Videos
09:07Author Spotlight: Advancing Endoscopic Ossiculoplasty – Techniques, Innovations, and Practical Guidance for Clinical Integration
Published on: January 26, 2024
15:11Surgical Fixation of Sternal Fractures: Preoperative Planning and a Safe Surgical Technique Using Locked Titanium Plates and Depth Limited Drilling
Published on: January 5, 2015
Related Concept Videos
Mortar Joint Deterioration in Masonry
The...
Posttensioned Masonry Walls
Post-tensioned masonry walls use high-strength steel rods or flexible tendons to enhance the strength and efficiency of masonry structures. These elements are securely anchored to the foundation and extend vertically either within the cores of the masonry units or between the masonry wythes. The construction process involves building the wall with these tensioning elements in place and allowing the mortar to fully cure.
Following the curing process, the tensioning begins. Steel rods are...