Environmental performance of an integrated water supply and wastewater system through life cycle assessment - A...

The objective of this study was to evaluate the environmental performance of an integrated water supply and wastewater system that employs a system of ponds at the wastewater treatment system. Additionally, this study aimed to understand the contribution of each stage of the system to the analyzed impact categories, and to evaluate alternative scenarios that consider the reduction of water losses in distribution, as well as the operation of an upflow anaerobic sludge blanket (UASB) reactor in the wastewater treatment plant (WWTP). The evaluation was performed through life cycle assessment (LCA) that considered the stages of water withdrawal, treatment, and distribution along with wastewater collection and treatment. The system was modeled in the OpenLCA software using the Ecoinvent 3.7.1 database. Environmental impacts were assessed using the ReCiPe method and cumulative energy demand. The results show that the water withdrawal stage is the potential source of the greatest environmental impacts. There are exceptions in the categories of climate change and photochemical oxidant formation, which are most impacted by the WWTP. Analysis of alternative scenarios revealed that the decrease in water loss rates during distribution contribute to a linear reduction in potential environmental impacts of the analyzed categories. The operation of a UASB reactor in the WWTP leads to a reduction in impacts on the categories of climate change (41.4%) and formation of photochemical oxidants (11.6%), and to increases in impacts on the other categories analyzed. The data presented provide important information for the improvement of public policies aimed at sanitation in developing countries.