Design of active fault-tolerant control system for Air-fuel ratio control of internal combustion engines using fuzzy
Umar Riaz1, Arslan Ahmed Amin1, Muhammad Tayyeb1
1Department of Electrical Engineering, 119728FAST National University of Computer and Emerging Sciences, Chiniot, Pakistan.
Background:
Fault-Tolerant Control Systems (FTCS) are used in critical and safety applications to improve performance and stability despite failure modes. As a result, costly production losses related to unusual and unplanned shutdowns can be prevented by incorporating these systems in the critical process plant machines. The Internal Combustion (IC) engines are highly used process plant machines and faults in their sensors will cause their shutdown instigating the need to install FTCS in them.
Introduction:
In this paper, an Active Fault-Tolerant Control System (AFTCS) based on a Fuzzy Logic Controller (FLC) is suggested to improve the reliability of the Air-Fuel Ratio (AFR) control system of an IC engine.
Methodology:
For analytical redundancy, a nonlinear Fuzzy Logic (FL) based observer is implemented in the proposed system for the Fault Detection and Isolation (FDI) unit for nonlinear sensors of the AFR system. Lyapunov stability analysis was used for designing a stable system in both faulty and normal conditions. To evaluate its performance, this system was developed in the MATLAB/Simulink platform.
Results:
The simulation results show that the developed system is robust under sensor fault conditions, retaining stability with a minimum decrease of AFR. This study's comparison with the existing literature demonstrates that the proposed system is effective for maintaining the AFR in IC engines during sensor faulty conditions thus reducing shutdown of engine and production loss for increased profits.
Related Concept Videos
Control Systems
At the heart...
Controller Configurations
Control-system compensation involves various configurations, most commonly series or cascade compensation, in which the controller...
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Control Systems: Applications
In modern vehicles, control systems manage various functions to enhance performance and safety. The steering wheel and accelerator are primary inputs in a car's control system. The...
PI Controller: Design


