Related Experiment Video
Updated: Sep 26, 2025

The Role of Fabric in Frictional Properties of Phyllosilicate-Rich Tectonic Faults
Published on: November 6, 2021
Study on the Effect of Fracturing Fluid on the Structure and Mechanical Properties of Igneous Rock
Kun Zhang1,2, Yuxuan Liu3, Lianqi Sheng1,2
1State Key Laboratory of Oil and Gas Resources and Prospecting, China University of Petroleum at Beijing, Beijing 102249, China.
Abstract:
Igneous rock oil and gas reservoirs have great development potential. Hydraulic fracturing is an important means for the development of these reservoirs. In the process of fracturing and increasing production, fracturing fluid is prone to a hydration reaction with clay minerals in igneous rock, and then, the structure and mechanical properties of the igneous rock are changed, affecting increased production. Therefore, it is necessary to establish a systematic water-rock reaction experiment method to understand the influence of fracturing fluid on the structure and mechanical properties of igneous rocks and to optimize the fracturing fluid system of igneous rock reservoirs. In this experiment, four solutions were used: slickwater, guar fracturing fluid, 2% KCl aqueous solution, and 4% KCl aqueous solution. Acoustic testing, porosity and permeability testing, XRD analysis, micro-CT scanning, and displacement experiments were performed. The influence of different fracturing fluids on the structure and mechanical properties of igneous rocks was studied. Igneous rock samples with a permeability of 0.05-0.1 mD and average porosity of 7-14% were used. The results show that all four liquid systems will reduce the permeability, Young's modulus, and brittleness index and increase the porosity and Poisson's ratio of the rock after fracturing. Among them, the permeability damage rate is as high as 37.37%, which may be related to the plugging of pores with solid residues in the gel breaking liquid; CT results show that there are microcracks in the rock, which increase over time, up to 13.54%. The brittleness index decreases. Among the fluids, the influence of slickwater on the rock brittleness index is the smallest, no more than 5%. Guar gum had the greatest effect on the Gel breaking liquid, up to 58%. One of the reasons for the increase in porosity is that adding a clay stabilizer composed of inorganic salts and organic cationic polymers to the slickwater fracturing fluid can effectively reduce the damage caused by the fracturing fluid to the rock during the fracturing process and can reduce the maximum by 50%. This paper can clarify the damage law of fracturing fluid systems to igneous rock reservoirs and provide the theoretical basis for the hydraulic fracturing of igneous rock reservoirs.
More Related Videos
09:12A Method for Studying the Temperature Dependence of Dynamic Fracture and Fragmentation
Published on: June 28, 2015
10:06Microfluidic Fabrication Techniques for High-Pressure Testing of Microscale Supercritical CO2 Foam Transport in Fractured Unconventional Reservoirs
Published on: July 2, 2020
Related Concept Videos
Unsoundness of Aggregate due to Volume Change
Stress-Strain Diagram - Brittle Materials
Microcracking in Concrete
Characteristics of Dry Friction
Before the wheelbarrow starts moving, the static frictional force acts tangentially to the contact surface, opposing the force that is about to induce the motion. This frictional force prevents the...
Characteristics of Fluids
Fluids, which include both liquids and gases, are substances that deform continuously under shearing stress. For example, water and oil are liquids with molecules that can...
Fractures: Bone Repair
Minor fractures with no bone displacement are treated by immobilizing the fractured bone using a cast or splint. However, in the case of fractures with displaced bones, the broken bones are repositioned before immobilization to ensure successful healing without deformation and loss of function. The realignment of fractured bone ends is performed through a process called reduction. If the...