Enhancement of Bond Performance of Advanced Composite Materials Used in Cable Bridge Structures Based on Tensile...

Structural steel and concrete are essential materials for the construction of social infrastructures. However, these materials undergo degradation over time, thereby causing steel corrosion. To address this problem, a fiber-reinforced polymer (FRP) is used for reinforcement. In this study, tensile tests were performed to evaluate the material properties for the application of the FRP to cable bridge structures. These tests aimed to investigate various parameters to improve bond performance. Based on experiments with different parameters, sufficient bond performance could be achieved if the following conditions are met: mortar water ≤16%, regardless of the manufacturer; a depth of splitting and steel pipe length ratio ≥75%; upward/downward directions for the mortar injection; and the use of fiber-sheet reinforcement. In addition, the steel pipe used in the test (length of 410 mm and outer diameter of 42.7 mm) performed the best in terms of workability and cost effectiveness. By conducting more accurate tests to study the basic properties of materials, more accurate conditions to accomplish sufficient bond performance can likely be achieved. This will contribute to improved cost effectiveness and safety in the use of carbon FRP cables in cable bridge constructions.