Related Experiment Video
Updated: Sep 25, 2025

Close-Space Sublimation-Deposited Ultra-Thin CdSeTe/CdTe Solar Cells for Enhanced Short-Circuit Current Density and Photoluminescence
Published on: March 6, 2020
High-performance dual-mode ultra-thin broadband CdS/CIGS heterojunction photodetector on steel
Abstract:
An ultra-thin CdS/CIGS heterojunction photodiode fabricated on steel firstly exhibits dual-mode broadband photodetection from ultraviolet to near infrared spectrum. In the photovoltaic mode, the CIGS photodiode, working as a self-driven photodetector, shows an outstanding photodetection capability (under a light power density of 20 µW cm-2 at 680 nm), reaching a record detectivity of ∼4.4×1012 Jones, a low noise equivalent power (NEP) of 0.16 pW Hz-1/2 and a high Ilight/Idark ratio of ∼103, but a relatively low responsivity of ∼0.39 A W-1 and an external quantum efficiency (EQE) of ∼71%. Working under the same illumination but in the photoconductive mode (1 V reverse bias), the responsivity and EQE are significantly enhanced to 1.24 A W-1 and 226%, respectively, but with a relatively low detectivity of 7×1010 Jones and a higher NEP of 10.1 pW Hz-1/2. To explain these results, a corrected photoconductive gain (G) model indicates that minority electrons could be localized in the defects, surface states and depletion region of the CIGS photodiode, causing excess hole accumulation in the ultra-thin CIGS photodiode and thus high EQE over 100% (G over 1).
More Related Videos
Related Concept Videos
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
High-Performance Liquid Chromatography: Types of Detectors
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...

