Efficient and reusable ordered mesoporous WO /SnO₂ catalyst for oxidative desulfurization of dibenzothiophene

The oxidative desulfurization (ODS) of organic sulfur compounds over tungsten oxide supported on highly ordered mesoporous SnO₂ (WO /meso-SnO₂) was investigated. A series of WO /meso-SnO₂ with WO contents from 10 wt% to 30 wt%, were prepared by conventional wet impregnation. The physico-chemical properties of the WO /meso-SnO₂ catalysts were characterized by X-ray diffraction (XRD), N₂ adsorption-desorption isotherms, electron microscopy, Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, and the temperature-programmed reduction of hydrogen (H₂-TPR). The characterization results indicated that these catalysts possessed mesoporous structures with uniform pores, high specific surface areas, and well-dispersed polyoxotungstate species on the surface of meso-SnO₂ support. The ODS performances were evaluated in a biphasic system (model oil/acetonitrile, S _initial = 2000 ppm), using H₂O₂ as an oxidant, and acetonitrile as an extractant. Dibenzothiophene (DBT) in the model oil was removed completely within 60 min at 50 °C using 20 wt% WO /meso-SnO₂ catalyst. Additionally, the effect of reaction temperature, H₂O₂/DBT molar ratio, amount of catalyst and different sulfur-containing substrates on the catalytic performances were also investigated in detail. More importantly, the 20 wt% WO /meso-SnO₂ catalyst exhibited 100% surfur-removal efficiency without any regeneration process, even after six times recycling.