Fabrication of ZnO/y-FeOOH nanoparticles embedded on the polyethylene terephthalate membrane: Evaluation of antifouling behavior and COD removal

Nanofiltration contributes to the development of advanced treatment of wastewater. An antifouling mixed matrix recycled polyethylene terephthalate (rPET) membrane modified by the hydrophilic ZnO/y-FeOOH nanoparticles (NPs) was fabricated via the electrospinning method. The effect of ZnO/y-FeOOH NP_S embedded in rPET as a modifier on the fabrication of nanocomposite membranes was investigated regarding water flux, membrane morphology, permeability, fouling resistance, and COD removal. The surface morphology of the rPET-ZnO/y-FeOOH membrane was evaluated by field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), water contact angle (WCA), and porosity and pore structure.Due to the embedding of NPs, the resulting rPET-ZnO/y-FeOOH membrane, with a low WCA of 53.404° angle, conforms significantly improved hydrophilicity and water permeation flux. The FESEM image displayed the distribution of cuboidal and needle-like ZnO and FeOOH NPs on the rPET membrane. The performance of the nanofiltration system related to the removal efficiency of COD was studied. It was deduced that the rPET-ZnO/y-FeOOH membrane had a superior COD removal capability (95.7%) at a pressure of 2 bar. Protein rejection tests were performed on antifouling behavior. The nanocomposite membrane with a high antifouling capability was related to 0.5 wt·% ZnO/y-FeOOH NPs (flux recovery ratio [FRR] = 96.2%, R_r = 90.21%, and R_ir = 3.001%). The modification procedure in this study (as a great improving technique) was proposed to fabricate the antifouling nanofiltration membrane.