Related Experiment Video
Updated: Sep 24, 2025

Exploring the Effects of Atmospheric Forcings on Evaporation: Experimental Integration of the Atmospheric Boundary Layer and Shallow Subsurface
Published on: June 8, 2015
Pore-Scale Study on Convective Drying of Porous Media
Linlin Fei1, Feifei Qin1, Jianlin Zhao1
1Chair of Building Physics, Department of Mechanical and Process Engineering, ETH Zürich (Swiss Federal Institute of Technology in Zürich), Zürich 8092, Switzerland.
Abstract:
In this work, a numerical model for isothermal liquid-vapor phase change (evaporation) of the two-component air-water system is proposed based on the pseudopotential lattice Boltzmann method. Through the Chapman-Enskog multiscale analysis, we show that the model can correctly recover the macroscopic governing equations of the multicomponent multiphase system with a built-in binary diffusion mechanism. The model is verified based on the two-component Stefan problem where the measured binary diffusivity is consistent with theoretical analysis. The model is then applied to convective drying of a dual-porosity porous medium at the pore scale. The simulation captures a classical transition in the drying process of porous media, from the constant rate period (CRP, first phase) showing significant capillary pumping from large to small pores, to the falling rate period (FRP, second phase) with the liquid front receding in small pores. It is found that, in the CRP, the evaporation rate increases with the inflow Reynolds number (Re), while in the FRP, the evaporation curves almost collapse at different Res. The underlying mechanism is elucidated by introducing an effective Péclet number (Pe). It is shown that convection is dominant in the CRP and diffusion in the FRP, as evidenced by Pe > 1 and Pe < 1, respectively. We also find a log-law dependence of the average evaporation rate on the inflow Re in the CRP regime. The present work provides new insights into the drying physics of porous media and its direct modeling at the pore scale.
More Related Videos
08:38Microfluidic Devices for Characterizing Pore-scale Event Processes in Porous Media for Oil Recovery Applications
Published on: January 16, 2018
06:28Fabric Moisture Uniform Control to Study the Influence of Air Impingement Parameters on Fabric Drying Characteristics
Published on: August 19, 2019
Related Concept Videos
Pore Size Distribution
Adequate...
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...
Capillarity in Fluid
Surface tension is crucial to capillarity. It results from cohesive forces between liquid molecules at the liquid-air boundary, forming a skin that resists external forces. When the capillary tube...
Porosity in Cement Paste
The balance of water to cement in the mix is...
Drying Shrinkage
A portion of this drying shrinkage can be reversed; if the concrete is...
Moisture Content and Bulking of Aggregate
When aggregates are exposed to rain or sit in stockpiles, they absorb moisture, which must be...