A membrane-less Glucose/O₂ non-enzymatic fuel cell based on bimetallic Pd-Au nanostructure anode and air-breathing...

Herein, the authors propose a miniaturized glucose/O₂ n-EFC based on a new direct electron transfer. The anode is a screen-printed carbon electrode (SPCE) modified with functionalized carbon nanotubes (f-CNTs) and cauliflower-like PdAu nanostructures (PdAuNS). The PdAuNS/f-CNT biomimetic nanocatalyst was prepared using a cost-effective and straightforward method, which consisted of drop-casting well-dispersed f-CNTs over the SPCE surface before PdAuNS electrodeposition. This enzyme-free interface was used for glucose electrooxidation at neutral medium (pH 7.4). The electrochemical behaviour of the PdAuNS/f-CNT/SPCE was investigated using cyclic voltammetry, linear sweep voltammetry, and amperometry. Several parameters were optimized and discussed, including the metal precursor concentration (HAuCl₄, PdCl₂) and the electrodeposition conditions. The cathode for oxygen electroreduction is an air-cathode which is composed of Pt-coated carbon cloth. The electrochemical performances of the anode and the cathode were evaluated separately for glucose oxidation and oxygen reduction, respectively. Both electrodes were then assembled in a membrane-less single chamber n-EFC with an innovative architecture. Electrical characterization of the n-EFC supplied with a neutral buffered solution containing 20 mM glucose showed a maximal power output of 129 ± 11 μW cm^-2, a current density of 600 ± 39 μA cm^-2 with a cell voltage of 0.35 V, and an open circuit potential of 0.56 V. The proposed electrocatalyst possesses several advantages such as fast response, low cost, reusability, poison-free characteristics, and good stability. Hence, glucose/O₂ n-EFC could be of great interest in direct glucose fuel cell applications (e.g., powering mountable/implantable biomedical micro-devices running at low electrical power supply) or in self-powered biosensing.