Related Experiment Video
Updated: Sep 24, 2025

Protocol for Measuring the Thermal Properties of a Supercooled Synthetic Sand-water-gas-methane Hydrate Sample
Published on: March 21, 2016
Effect of fragmentation on the transport of polyvinyl chloride and low-density polyethylene in saturated quartz sand
Faith Chebet Tumwet1, Rebecca Serbe2, Tomas Kleint3
1Chair of Hydrogeology and Hydrochemistry, Freiberg University of Mining and Technology (TU Bergakademie Freiberg), 09599 Freiberg, Germany; Zittau Institute for Process Development, Recycling Management, Surface Technology, and Natural Substance Research (ZIRKON), University of Applied Sciences Zittau/Görlitz (HSZG), 02763 Zittau, Germany.
Abstract:
Microplastics are an obstinate pollutant in terrestrial environments, posing a risk to the subsurface soil matrix and potentially to groundwater. In this study, the transport and retention behaviour of two major plastic polymers, 125-300 μm Polyvinyl chloride (PVC) plastic fragments and 300 μm Low-density polyethylene (LDPE) spherical particles, were explored in saturated quartz sand (1.6-2.0 mm) columns. The PVC used in this study represented secondary microplastics, while the LDPE represented primary microplastics. Retention profiles at different ultrapure water flow rates (2.0-3.5 ml/min) were compared and analysed. At the beginning and end of each column test, the microplastic particles were scrutinized, identified, and quantified by light microscopy. The results showed that the transport distance of microplastic particles increased with their decreasing diameter. Small-sized PVC microplastic particles, whose morphology was more 1-dimensional, were more susceptible to fragmentation within the column, promoting migration. Spherical LDPE remained at their initial position without fragmenting. Microplastic degradation into fragments appeared to play an important role in improving the movement of particles. This study offers initial indications of infiltration depths and shape-dependent fragmentation of secondary microplastics in coarse sand based on the lab experiments.
Related Concept Videos
Unsoundness of Aggregate due to Volume Change
Deleterious Substances in Aggregate
Another type of impurity is clay and fine material that...
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...
Silica Gel Column Chromatography: Overview
Polar components tend to bind strongly to the silica gel, causing them to move slowly through the column. In contrast, nonpolar compounds...

