Non-destructive analysis of hollow-shaped single fibers using X-ray computed tomography

A commercial high-resolution X-ray computed tomography (CT) was utilized for non-destructive analysis of single fibers. The micro-CT apparatus was employed because it is applicable to both colored and colorless fibers. A sample preparation using adhesive sheets was demonstrated, and the method is similar to typical tape-lift sample collection method in crime cases. Different cross-sectional shapes of nylon and polyester single fibers were non-destructively distinguished, and the method is applicable to all types of fibers. Cross-sectional areas, aperture ratios, and volumes of individual fibers were directly and automatically measured using the open-source software. The observed parameters were within a coefficient of variation of 3%. In addition, a mass of a single fragment of a fiber can be estimated when the local density is given.