The effects of filter characteristics of single-filter cartridge on dust removal performance with simulation and...

To obtain the adaptability range of the single-filter cartridge dust collector, a numerical analysis of the key component (filter cartridge) that affects the filter performance of the dust collector is carried out. The study found that the filtration air velocity gradually decreases from the top A to the bottom C of the filter cartridge surface. During the filtration process, along the surface of the filter cartridge from C to A, the pressure first drops and then rises. At C, the negative pressure is the largest, with an average of about 525 Pa. The ineffective filtration area of section A of the upper part of the filter cartridge accounts for 2/5 of the filtration area, and the concentration of the first layer of dust is y = (0.01 ± a) + 0.02 × (0.08 ± b)^x exponentially decreasing. The critical particle size range that the filter cartridge can filter dust is M≥1.87 μm, and the best dust removal range of the dust collector is N≥4.625 μm. An agreement between experiment and simulating results proves the validity of simulation model and reliability of the experimental data. Enterprises can choose a reasonable dust removal method based on the research results to optimize the adaptability of the working environment and the dust collector. It also provides a theoretical basis for researchers to solve the problems in the filtration and cleaning process.