Related Experiment Video
Updated: Sep 24, 2025

Determining Viral Disinfection Efficacy of Hot Water Laundering
Published on: June 21, 2022
Resource utilization of medical waste under COVID-19: Waste mask used as crude oil fluidity improver
Abstract:
The disposal of medical waste has become an increasing environmental issue since the COVID-19 epidemic outbreaks. Conventional disposal methods have produced waste of fossil resources and environmental problems. In this study, the waste medical mask-derived materials were tested as viscosity reducer and pour point depressant to evaluate the possibility of being used as crude oil fluidity improver. The results show that the materials derived from the three parts of the waste medical mask can reduce the viscosity and pour point of each crude oil samples from different oilfields in China. The middle layer of the medical mask (PP-2) displays the highest efficiency, and the viscosity reduction rate and maximum pour point reduction reaches 81% and 8.3 °C at 500 ppm, respectively. A probable mechanism of improving rheological properties of the crude oil samples by the medical mask-derived materials was further proposed after the differential scanning calorimetry (DSC) analysis and the wax crystal morphology analysis. We hope this work could provide a way to solve the current environmental issues under COVID-19.
Related Concept Videos
Administering Oxygen by Mask
Administering oxygen by mask is a common nursing intervention that provides supplemental oxygen to patients with respiratory distress or chronic lung conditions. This procedure involves delivering oxygen at a specified rate through a face mask connected to an oxygen source.
Equipment
The equipment necessary for this procedure includes:
Standard Precaution
Hand hygiene is the most crucial means to prevent the transmission of disease. Employers are legally required to provide their workers with personal protective equipment (PPE) to minimize exposure or contact with...
PPE Use in Healthcare Settings II: Doffing
Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...
Bioremediation
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...

