Hydrophobic resin treatment of hydrothermal autohydrolysate for prebiotic applications

The production of a high-value xylooligosaccharide (XOS) prebiotic product from lignocellulosic autohydrolysate requires processing for the removal of non-carbohydrate components such as lignin and furfural. In this research, the nature of XOS dissolved in autohydrolysate is evaluated including the XOS degree of polymerization (DP) distribution and potential covalent association between XOS and lignin (LCC). The impact of these factors on the yield of XOS during treatment of Miscanthus autohydrolysate with hydrophobic resin is assessed. Over 30% of the XOS in autohydrolysate was found to be likely associated with lignin ("tied" XOS), all of which was removed during hydrophobic resin treatment along with over 90% of the dissolved lignin. However, loss of dissolved XOS during resin treatment was found to not be due solely to XOS association with lignin. Over 50% of the "free," non-lignin-associated XOS was also removed by resin treatment. Interaction between "free" XOS and the hydrophobic resin was found to be highly dependent on DP with higher DP XOS being removed far more readily than low DP XOS. Over 80% of dissolved "free" XOS with a DP of six and above (X6+) was removed from autohydrolysate during treatment while only 17% of xylose (X1) was removed. Efforts to understand the interaction between the hydrophobic resin and XOS and to improve the recovery of XOS during hydrophobic resin treatment are presented.