Related Experiment Video
Updated: Sep 24, 2025

Determining the Chemical Composition of Corrosion Inhibitor/Metal Interfaces with XPS: Minimizing Post Immersion Oxidation
Published on: March 15, 2017
Experimental and theoretical evaluations on Oleuropein as a natural origin corrosion inhibitor for copper in acidic
M A Deyab1, Q Mohsen2, E Bloise3
1Egyptian Petroleum Research Institute (EPRI), Nasr City, Cairo, Egypt. hamadadeiab@yahoo.com.
Abstract:
Copper corrosion in acidic cleaning solutions is a major worry for heat exchangers. Corrosion inhibitors derived from natural sources might be a viable option. The isolation of Oleuropein compound from olive leaf and investigation of its anticorrosion potential for copper in 1.0 M H2SO4 solution are reported here. All experimental results from LC-MS, FT-IR, 1H and 13C-NMR characterizations support the molecular structure of Oleuropein. Electrochemical and gravimetric tests were used to evaluate the corrosion inhibition capabilities of Oleuropein. According to polarization investigation, Oleuropein is a mixed-type inhibitor. Oleuropein's inhibitory efficacy increases with concentration, attaining an optimum value (98.92%) at 100 mg L-1. At high temperatures, Oleuropein can be considered an efficient inhibitor. Thermodynamic variables for the activation operation and copper dissolution were computed and addressed as well. Scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) examinations revealed that Oleuropein produced an outer layer on the copper surface, shielding it from severe acid damage. Quantum chemical simulations were employed to propose molecular explanations for Oleuropein's inhibitory actions.
Related Concept Videos
Corrosion
Extraction: Advanced Methods
Corrosion of Reinforcement
However, over time and under certain conditions like carbonation, chloride ingress, and cracking this protective state can be compromised. Steel has areas with...
Electrodeposition
Electrodeposition can...

