Phycocyanin from Spirulina platensis bio-mimics quantum dots photocatalytic activity: A novel approach for dye...

In our present study, the photocatalytic degradation of malachite green (MG) an organic dye was carried out using a phycocyanin extract of Spirulina platensis under the irradiation of sunlight. The aim of the present study is to incorporate a simple, novel, an eco-friendly, and cost-effective degradation of dyes without using any harmful metals and chemicals. It was observed that 25 ppm of MG dye got degraded nearly to 100 % at 3 h. The UV absorbance studies indicate the absence of a peak at 620 nm which is a conclusive evidence for MG dye degradation. An optimization study of MG dye degradation was evaluated by Response Surface Methodology using Minitab module 20.4.0.0 statistical software and its percentage of degradation was statistically analyzed using analystat. The FT-IR studies of raw spectra show minimal variation; however, the deconvoluted spectra in the region of 1600-1700 cm^-1 indicate the variation in the secondary structure of amide I bands that leads to the dye degradation. The dye degradation study mainly follows the first-order kinetics between the time intervals of 60-180 min. The characteristics of degraded water were assessed by a TOC analyzer. The value of total inorganic carbon (TIC) in MG before treatment was 90 mg/L and seems to be slightly high when compared to MG after treatment which was found to be 87.65 mg/L and the adsorbent-treated water with a low value of 54.25 mg/L. These results well matched with the characteristics of normal water. The presence of phycocyanin in the degraded water was effectively removed by treating with activated carbon and it was confirmed with fluorescence analysis. These results support that the MG dye degradation was exhibited by phycocyanin extract and bio-mimics the quantum dot photocatalytic activity.