Modeling of cadmium(II) removal in a fixed bed column utilizing hydrochar-derived activated carbon obtained from...

Cadmium is found in many underdeveloped countries' aquatic bodies. Therefore, contaminated water should be treated before consumption; henceforth, efficient and customized point-of-use filtration is foreseeable. Traditionally, carbon-based sorbents have been utilized for such treatments, but alternative sources are also being investigated. Hydrochars made from mango peels using a thermal activation process were employed as an adsorbent instead of activated carbon in this investigation. The prepared material was porous with active surface functionalities, and the interaction of cadmium with the surface was possibly ion-exchange in nature. The performance of a material for a candle water filtering system with a 2.5 cm internal diameter and a 30.48 cm column height was determined using the parameters acquired by the Thomas model. The material was found to be highly efficient at 453.5 L/min/Filter water, whereas 31670.6 L/min/Filter can be treated if the break point and exhaustion point are considered, respectively, as the candle replacement time. These findings indicate that activated hydrochar might be a suitable sorbent for removing cadmium ions from contaminated water.