Ultra-high adsorption of Hg⁰ using impregnated activated carbon by selenium

Activated carbon was one of the main adsorptions utilized in elemental mercury (Hg⁰) removal from coal combustion flue gas. However, the high cost and low physical adsorption efficiency of activated carbon injection (ACI) limited its application. In this study, an ultra-high efficiency (nearly 100%) catalyst sorbent-Se_x/Activated carbon (Se_x/AC) was synthesized and applied to remove Hg⁰ in the simulated flue gas, which exhibited 120 times outstanding adsorption performance versus the conventional activated carbon. The Se_x/AC reached 17.98 mg/g Hg⁰ adsorption capacity at 160 °C under the pure nitrogen atmosphere. Moreover, it maintained an excellent mercury adsorption tolerance, reaching the efficiency of Hg⁰ removal above 85% at the NO and SO₂ conditions in a bench-scale fixed-bed reactor. Characterized by the multiple methods, including BET, XRD, XPS, kinetic and thermodynamic analysis, and the DFT calculation, we demonstrated that the ultrahigh mercury removal performance originated from the activated Se species in Se_x/AC. Chemical adsorption plays a dominant role in Hg⁰ removal: Selenium anchored on the surface of AC would capture Hg⁰ in the flue gas to form an extremely stable substance-HgSe, avoiding subsequent Hg⁰ released. Additionally, the oxygen-containing functional groups in AC and the higher BET areas promote the conversion of Hg⁰ to HgO. This work provided a novel and highly efficient carbon-based sorbent -Se_x/AC to capture the mercury in coal combustion flue gas. Graphical abstract Selenium-modified porous activated carbon and the interface functional group promotes the synergistic effect of physical adsorption and chemical adsorption to promote the adsorption capacity of Hg⁰.