The Precision and Accuracy of 3D Printing of Tablets by Fused Deposition Modelling

Tablet manufacture by fused deposition modelling (FDM) can be carried out individually (one tablet printed per run) or as a group (i.e., 'multiple printing' in one run) depending on patient's needs. The assessment of the process of printing must take into consideration the precision and the accuracy of the mass and dose of tablets, together with their solid-state properties and drug dissolution behaviour. Different mixtures made of either poly(vinyl alcohol) and paracetamol or hydroxypropylcellulose EF and hydrochlorothiazide were used to evaluate multiple printing of tablets by manufacturing batches of 30 tablets with nozzles of 0.4 and 0.7 mm, in two different printers. Besides testing for mass, drug content, density and dissolution performance, tablets were analysed for their thermal (DSC) and spectroscopic (NIR and FTIR) properties. Low standard deviations around mean values for the different properties measured suggested low intra-batch variability. Statistical analysis of data revealed no significant differences between the batches for most of the properties considered in the study. Inter-batch differences (p<0.05) were observed only for mass of tablets, possibly due to deviation on filament's diameter. The use of a smaller nozzle or a different printer enabled the manufacture of more reproducible tablets within a batch. Multiple printing revealed a significant saving on manufacturing time (>35%) in comparison to individual printing.