Related Experiment Video
Updated: Sep 22, 2025

Trapping of Micro Particles in Nanoplasmonic Optical Lattice
Published on: September 5, 2017
Characterization of condensation on nanostructured surfaces and associated thermal hydraulics using a thermal lattice
Aritra Mukherjee1, Dipankar N Basu1,2, Pranab K Mondal1
1Department of Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati 781039, India.
Abstract:
The dynamics of the condensation process on nanostructured surfaces can be modulated substantially by tuning the surface architecture. Present study uses the mesoscopic framework of lattice Boltzmann method (LBM) to explore the role of surface morphology and cold spot temperature in determining the visual state of the condensate droplet, mode of nucleation, and associated rates of energy and mass interactions. A multiple relaxation time-(MRT)-based LBM solver, coupled with pseudopotential model, has been developed to simulate a rectangular domain of saturated vapor, housing a cold spot on the bottom rough surface. Superhydrophobicity has been achieved for certain combinations of surface parameters, with the intercolumn spacing being the most influential one. Gradual increase in the spacing modifies the nucleation mode from top through side to bottom, while the droplet changes from Cassie to Wenzel state. The Cassie drop in top nucleation mode exhibits the largest contact angle and least rate of surface heat transfer. Both types of Wenzel drops display large rate of condensation and two peaks in heat transfer, along with very short nucleation time in comparison with Cassie drops. Couple of phase diagrams have been developed combining all four scenarios of condensation predicted by the present model. One important novelty of the present study is the consideration of nonisothermal condition within LB structure. Enhancement in the degree of subcooling at the cold spot encourages greater condensation and Cassie-to-Wenzel transition.
Related Concept Videos
Phase Transitions: Vaporization and Condensation
Mechanisms of Heat Transfer II
Mechanisms of Heat Transfer I
Mechanisms of Heat Transfer
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant...
Mechanism of heat transfer
Distribution of Molecular Speeds

