Building a UAV Based System to Acquire High Spatial Resolution Thermal Imagery for Energy Balance Modelling

High spatial resolution and geolocation accuracy canopy evapotranspiration (ET) maps are well suited tools for evaluation of small plot field trials. While creating such a map by use of an energy balance model is routinely performed, the acquisition of the necessary imagery at a suitable quality is still challenging. An UAV based thermal/RGB integrated imaging system was built using the RaspberryPi (RPi) microcomputer as a central unit. The imagery served as input to the two-source energy balance model pyTSEB to derive the ET map. The setup's flexibility and modularity are based on the multiple interfaces provided by the RPi and the software development kit (SDK) provided for the thermal camera. The SDK was installed on the RPi and used to trigger cameras, retrieve and store images and geolocation information from an onboard GNSS rover for PPK processing. The system allows acquisition of 8 cm spatial resolution thermal imagery from a 60 m height of flight and less than 7 cm geolocation accuracy of the mosaicked RGB imagery. Modelled latent heat flux data have been validated against latent heat fluxes measured by eddy covariance stations at two locations with RMSE of 75 W/m² over a two-year study period.