Assessment of Woodcrete Using Destructive and Non-Destructive Test Methods

Utilizing solid wastes and industrial by-products as a partial replacement for raw materials has become an acceptable practice among researchers and scientists in the civil engineering field. Sawdust and wood shavings are not an exception; they are being used in concrete as a partial or total replacement for some of its constituents. The main goal of this research is to establish a relation between destructive and non-destructive testing for concrete containing wood shavings as a partial replacement of sand (woodcrete). With this type of material existing, thus the need to understand the behavior of such material becomes urgent and evokes the need to ease the process of the assessment and the evaluation of such materials and therefore provide more understanding of its behavior. In addition to the conventional concrete mix, five mixes of woodcrete were made by replacing fine aggregate by volume with wood shavings at different replacement levels varied from 5% to 50%. Cubic samples were tested at the age of 90 days using nondestructive tests (NDT), namely, rebound hammer test and ultrasonic pulse velocity test. Then, the specimens were tested using a conventional compressive test using a universal compression testing machine. Statistical analysis was performed to establish empirical relations between destructive and non-destructive results. The dynamic modulus of elasticity was calculated, and some formulas to estimate the (compressive) strength of woodcrete using NDT results were proposed and tested against experimental results and showed acceptable results.