Vast emission of Fe- and Ti-containing nanoparticles from representative coal-fired power plants in China and...

Coal combustion is considered an important source of atmospheric nanoparticles (NPs). However, the underlying information on the emission of NPs from coal-fired power plants (CFPPs) is still lacking. Along these lines, in this study, coal fly ashes (CFAs) were collected from different multi-stage particulate emission control devices (PECDs) in three representative CFPPs in China. The particle size and particle number concentration (PNC) of typical metal-containing NPs (Fe- and Ti-containing NPs) were analyzed by using the single-particle inductively coupled plasma mass (SP-ICP-MS) technology. By increasing the stage of PECDs, the mean particle sizes of NPs gradually declined and the PNCs of Fe- and Ti-containing NPs increased significantly. Specifically, the PNC of final-stage CFA was 3 - 8 times that of the first-stage CFA. A comparison of the electrostatic precipitators (ESPs), fabric filters (FFs), and electrostatic-fabric-integrated precipitators (EFIPs) showed that the state-of-the-art EFIPs exhibited a relatively good NP-removal efficiency with the highest PNCs. In addition, NP hourly emissions in all coal combustion by-products (CCPs) were further calculated in a typical CFPP. The total emissions of Fe- and Ti-containing NPs in all CCPs were 1.87 × 10¹⁸ and 1.57 × 10¹⁸ particles/h, respectively. NPs were mainly enriched in CFA trapped by PECDs (80% of total emissions). Although the mass of the CFA that escaped through the stack was extremely low, it contained the highest PNCs of Fe- and Ti-containing NPs of all CCPs, accounting for 3.41% and 1.67% of the corresponding total NP emissions. These NPs may also coexist with various toxic metals, such as Zn and Pb, and be released directly into the atmosphere, where they pose a potential risk to human health.