Related Experiment Video
Updated: Sep 21, 2025

Processing of Bulk Nanocrystalline Metals at the US Army Research Laboratory
Published on: March 7, 2018
The Microstructural Evolution and Grain Growth Kinetics of Fine-Grained Extruded Mg-Nd-Zn-Zr Alloy
Xueyan Jiao1,2, Xinjie Li1,2, Liqiang Zhan2
1School of Naval Architecture and Port Engineering, Shandong Jiaotong University, 1508 Hexing Road, Weihai 264310, China.
Abstract:
The microstructure evolution and grain growth kinetics of the fine-grained extruded Mg-Nd-Zn-Zr alloy were investigated by holding the extruded plate for a wide range of time in the temperature range of 470 °C to 530 °C. By observing the optical micrographs, it was found that the material showed abnormal grain growth at the experimental condition of 470 °C × 24 h, and the time point of abnormal grain growth appeared significantly earlier with the increase in the experimental temperature. The evaluation of the second phase content within the alloy indicates that the presence of the second phase contributes to the microstructural stability of the Mg-Nd-Zn-Zr alloy. However, the slow coarsening/dissolution of the second phase is an important cause of abnormal grain growth. Based on the experimental data, the isothermal grain growth kinetic models of the fine-grained extruded Mg-Nd-Zn-Zr alloy were developed based on the Sellars model. The grain growth exponent was in the range of 5.5-8 and decreased gradually with the increase in the experimental temperature. The grain growth activation energy is approximately 150.00 kJ/mol, which is close to the bulk diffusion activation energy of magnesium, indicating that the grain growth is controlled by lattice diffusion. By energy spectrometry (EDS), the compositional changes of the second phase within this alloy at 500 °C were investigated.
Related Concept Videos
Ziegler–Natta Chain-Growth Polymerization: Overview
Stress-Strain Diagram - Ductile Materials

