Facilitating maintenance of stormwater ponds: comparison of analytical methods for determination of metal pollution

Stormwater ponds are widely used for controlling runoff quality through the sedimentation of particles and associated pollutants. Their maintenance requires regular removal and disposal of accumulated material. This necessitates an assessment of material hazardousness, including potential hazard due to its contamination by metals. Here we analyze 32 stormwater pond sediment samples from 17 facilities using several chemical analysis methods (total extraction, sequential extraction, diffusive gradients in thin-films DGT, and pore water extraction) in order to consider the complementarity and comparability of the different approaches. No clear relationship was found between analyses that have the potential to measure similar metal fractions (DGT and either fraction 1 of the sequential extraction (adsorbed and exchangeable metals and carbonates) or pore water concentrations). Loss on ignition (LOI) had a significant positive correlation with an indicator of the environmental risk developed in this paper (∑ranks) that incorporates different metals, speciations, and environmental endpoints. Large variations in metal levels were observed between ponds. As clustering was limited between the different analyses, a comprehensive analysis of different parameters is still needed to fully understand metal speciation and bioavailability.