Optimization via response surface methodology of the synthesis of a dust suppressant and its performance...

To relieve dust pollution in open cut coal mines and reduce the hazards of coal dust pollution to the environment and workers we optimized the synthesis of a dust suppressant by graft copolymerization of environmentally friendly soy protein isolate with methyl methacrylate. This dust suppressant could effectively control dust pollution in open cut coal mines. The optimized conditions for graft copolymerization in this case were determined by a response surface experiment designed with Design-Expert 10 software. Characterization by scanning electron microscopy showed a significant morphology change of the dust suppressant and the generation of a rigid and dense layer on its surface after interacting with coal dust. The layer exhibited good bonding and dust suppression performance. The analysis with Fourier-transform infrared spectroscopy revealed the appearance of new absorption peaks near 1300, 1072, and 1631 cm^-1, demonstrating effective graft copolymerization. The proposed dust suppressant exhibited excellent wind erosion resistance, with a resistance that exceeded 90% at a wind speed of 6.5 m/sec. The successful graft copolymerization and effective bonding and curing of the dust suppressant on coal dust were experimentally verified. This is of great significance to the control of coal dust pollution.