Effects of Ethanol and Methanol on the Combustion Characteristics of Gasoline with the Revised Variation Disturbance
Shu-Hao Li1, Zhenhua Wen1, Junxing Hou2
1School of Aero Engine, Zhengzhou University of Aeronautics, Zhengzhou 450046, People's Republic of China.
Abstract:
This paper proposes a revised variation disturbance method to provide valuable information and reference for fuel design or optimization of internal combustion engines to realize the comprehensive and quantitative evaluation of the effects of blending agents on the combustion performance of primary fuels. In this method, methanol and ethanol are blended into gasoline to form six kinds of alcohol-gasoline (E10, E20, E30, M10, M20, and M30). Then, the ignition delay, adiabatic flame temperature, component concentration, fuel-burning rate, extinction strain rate, and CO emission of gasoline and alcohol-gasoline are studied by system simulation in a wide range of operating conditions. Based on the new variation disturbance method, the effects of methanol and ethanol on the combustion performance of gasoline are next analyzed globally and characterized quantitatively. The comprehensive results of ethanol and methanol on the gasoline's combustion are visually presented. The method proposed in this paper is preliminarily validated based on the analysis of the microscopic mechanism of combustion. The results show that the blending of ethanol and methanol has positive effects on gasoline combustion, and ethanol can rapidly ignite the gasoline in a wide range of operating conditions and is superior to methanol in terms of fuel combustion, stability, and pollutant discharge. Based on the treatment of simulated values of six combustion characteristics selected in this paper and the calculations of the variation disturbance method, the total disturbance values of ethanol and methanol to gasoline combustion are obtained as 0.8493 and 0.2605, respectively. That is, ethanol has a more significant effect on improving the combustion performance of gasoline than methanol. In addition, based on the analysis results of the combustion, it is found that the blending of ethanol enlarges the reaction of notable components in gasoline. This finding also proves the effectiveness and validity of the scientific method utilized in this paper.
Related Concept Videos
02:14Combustion Energy: A Measure of Stability in Alkanes and Cycloalkanes
Alkanes undergo combustion in the presence of excess oxygen and high-temperature conditions to give carbon dioxide and water. A combustion reaction is the energy source in natural gas, liquified...
02:37Standard Enthalpy of Formation
02:12Enthalpy and Heat of Reaction
02:18Conformations of Ethane and Propane
Staggered conformation is a low energy and more stable conformation with the C-H bonds on the front carbon placed at 60°dihedral angles relative to the C-H bonds on the back carbon, leading to a reduced torsional strain. In staggered...
02:17Physical Properties of Ethers
An ether molecule has a net dipole moment due to the polarity of C–O bonds. Subsequently, boiling points of ethers are lower than those of alcohols of comparable molecular weight and slightly higher than those of hydrocarbons of comparable molecular weight (Table 1).
Ethers can act as hydrogen bond acceptors, making them more water-soluble than hydrocarbons, but since ethers cannot act as hydrogen bond donors, they are much less soluble in water than alcohols. Ethers are considered...
01:33Carboxylic Acids to Methylesters: Alkylation using Diazomethane