Related Experiment Video
Updated: Sep 20, 2025

Stress Distribution During Cold Compression of Rocks and Mineral Aggregates Using Synchrotron-based X-Ray Diffraction
Published on: May 20, 2018
Pore Structure Characteristics and Strength Variation of Red Sandstone under Freeze-Thaw Cycles
Yongwei Lan1, Hongmei Gao2, Yanlin Zhao2
1College of Mining Engineering, Heilongjiang University of Science and Technology, Harbin 150022, China.
Abstract:
To study pore structure characteristics and the strength of red sandstone under freeze-thaw cycles, the saturated red sandstone was studied by the combination of freeze-thaw cycle test, high-pressure mercury injection test, uniaxial compression test and theoretical analysis, and research shows that: with the increase of freeze-thaw cycles, the pores of red sandstone continue to expand and extend, macropore volume and the total pore volume increases gradually, and the pore size distribution curves become more continuous. Porosity of samples after 10, 30, 70 and 100 freeze-thaw cycles is 1.14 times, 1.17 times, 1.28 times and 1.44 times of that of 0 cycle, and the uniaxial compressive strength of samples is 0.68 times, 0.53 times, 0.26 times and 0.17 times of that of 0 cycle, respectively. With the increase of freeze-thaw cycles, freeze-thaw damage continues to accumulate, the crack propagation direction changes from axial through-through failure mode to transverse and axial simultaneous failure mode. Taken the change of porosity as a parameter, through the regression analysis of the test data, the functional relationship between uniaxial compressive strength and the change of porosity in red sandstone is established. The research results will provide a theoretical basis for stability research of slopes of railway subgrade in cold region.
More Related Videos
12:18Pore-scale Imaging and Characterization of Hydrocarbon Reservoir Rock Wettability at Subsurface Conditions Using X-ray Microtomography
Published on: October 21, 2018
05:38Production and Analysis of Sporosarcina pasteurii Biocement Bricks Using Custom 3D-Printed Molds for Unconfined Compression Tests
Published on: March 7, 2025
Related Concept Videos
Frost Action on Concrete
This freeze-thaw cycle primarily causes surface scaling, where...
Pore Size Distribution
Adequate...
Unsoundness of Aggregate due to Volume Change
Frost Resistant Concrete
Introducing microscopic air bubbles into the concrete mix through air entrainment creates small voids that accommodate ice expansion, thereby reducing internal pressures and preventing cracking. The optimal amount of...
Brick Durability, Strength, and Appearance
Mortar Joint Deterioration in Masonry
The...