Related Experiment Video
Updated: Sep 20, 2025

Determining Viral Disinfection Efficacy of Hot Water Laundering
Published on: June 21, 2022
Coronaviruses are stable on glass, but are eliminated by manual dishwashing procedures
Katja Schilling-Loeffler1, Alexander Falkenhagen1, Reimar Johne1
1German Federal Institute for Risk Assessment, Max-Dohrn-Straße 8-10, 10589 Berlin, Germany.
Abstract:
Severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2) is primarily transmitted from human to human via droplets and aerosols. While transmission via contaminated surfaces is also considered possible, the overall risk of this transmission route is assumed to be low. Nevertheless, transmission through contaminated drinking glasses may pose an increased risk as the glass is in direct contact with the mouth and oral cavity. Using human coronavirus 229E (HCoV-229E) as surrogate for SARS-CoV-2, this study examined coronavirus stability on glass, inactivation by dishwashing detergents, and virus elimination by a manual glass scrubbing device. Infectious HCoV-229E was recovered from glass for 7 and 21 days of storage under daylight and dark conditions, respectively. Near complete inactivation of HCoV-229E (>4 log10 reduction) was observed after incubation with two common dishwashing detergents at room temperature for 15 s, whereas incubation at 43 °C for 60 s was necessary for a third detergent to achieve a similar titer reduction. The virus was efficiently removed from contaminated drinking glasses using a manual glass scrubbing device in accordance with German standard DIN 6653-3. The results confirm that coronaviruses are relatively stable on glass, but indicate that common manual dishwashing procedures can efficiently eliminate coronaviruses from drinking glasses.
Related Concept Videos
Hand hygiene
Hand washing...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Handwashing I: Introduction and Types of Equipment
Hand wash basins in clinical areas should have faucets that can be turned on and off without using the hands; that is, they should be non-touch or lever-operated....
Handwashing III: During the Procedure and Post-Procedure Steps
Handwashing II: Pre-procedure and Initial Procedure Steps
The hand washing procedure itself includes the following steps. First, cover cuts, if any, on hands with a waterproof dressing. Cuts and abrasions can become contaminated with bacteria hindering the ability to clean the area thoroughly. In addition, repeated hand washing can worsen an injury. The nails must be short and clean, without nail...
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...

