Related Experiment Video
Updated: Sep 8, 2025

Biomass Conversion to Produce Hydrocarbon Liquid Fuel Via Hot-vapor Filtered Fast Pyrolysis and Catalytic Hydrotreating
Published on: December 25, 2016
Catalytic Pyrolysis of Nonedible Oils for the Production of Renewable Aromatics Using Metal-Modified HZSM-5 Catalysts
Xiaoling Liu1,2, Yafei Wu1,2, Jun Zhang1,2
1Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037, China.
Abstract:
Catalytic pyrolysis of triglycerides to aromatics over zeolites is an advanced technology for a high value-added utilization of renewable biomass resources. Therefore, in this research, the catalytic performance of M/HZSM-5 catalysts (M = Zn, Ga, In, Ni, and Mo) during the pyrolysis process of glycerol trioleate and the effect of the compositional difference of several woody oils and waste oils on aromatic formation were investigated. Results revealed that Zn/HZSM-5 with appropriate acidity and metal sites reached the maximum aromatics yield (56.13%) and significantly enhanced the catalytic stability. In addition, these renewable nonedible oils were effectively converted to aromatics over the Zn/HZSM-5 catalyst, the aromatic yield of jatropha oil reached up to 50.33%, and the unsaturation and double bond number of feedstocks were crucial for the production of aromatics. The utilization of biomass resources to produce high value-added aromatics can alleviate the problems caused by the shortage of fossil resources and achieve sustainable green development.
More Related Videos
11:33Laboratory Production of Biofuels and Biochemicals from a Rapeseed Oil through Catalytic Cracking Conversion
Published on: September 2, 2016
11:44Qualitative Characterization of the Aqueous Fraction from Hydrothermal Liquefaction of Algae Using 2D Gas Chromatography with Time-of-flight Mass Spectrometry
Published on: March 6, 2016
Related Concept Videos
Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...
Reduction of Alkenes: Catalytic Hydrogenation
Metals like palladium, platinum, and nickel are commonly used in their solid forms — fine powder on an inert surface. As these catalysts remain insoluble in the reaction mixture, they are referred to as heterogeneous catalysts.
The hydrogenation process takes place on the...
Reduction of Alkynes to cis-Alkenes: Catalytic Hydrogenation
Like alkenes, alkynes can be reduced to alkanes in the presence of transition metal catalysts such as Pt, Pd, or Ni. The reaction involves two sequential syn additions of hydrogen via a cis-alkene intermediate.
Reduction of Benzene to Cyclohexane: Catalytic Hydrogenation
Olefin Metathesis Polymerization: Overview
Ruthenium-based Grubbs catalyst is the most commonly used catalyst for olefin metathesis polymerization. Grubbs catalyst consists...
Catalysis