Multiphoton Lithography of Organic Semiconductor Devices for 3D Printing of Flexible Electronic Circuits, Biosensors,...

In recent years, 3D printing of electronics have received growing attention due to their potential applications in emerging fields such as nanoelectronics and nanophotonics. Multiphoton lithography (MPL) is considered the state-of-the-art amongst the microfabrication techniques with true 3D fabrication capability owing to its excellent level of spatial and temporal control. Here, a homogenous and transparent photosensitive resin doped with an organic semiconductor material (OS), which is compatible with MPL process, is introduced to fabricate a variety of 3D OS composite microstructures (OSCMs) and microelectronic devices. Inclusion of 0.5 wt% OS in the resin enhances the electrical conductivity of the composite polymer about 10 orders of magnitude and compared to other MPL-based methods, the resultant OSCMs offer high specific electrical conductivity. As a model protein, laminin is incorporated into these OSCMs without a significant loss of activity. The OSCMs are biocompatible and support cell adhesion and growth. Glucose-oxidase-encapsulated OSCMs offer a highly sensitive glucose sensing platform with nearly tenfold higher sensitivity compared to previous glucose biosensors. In addition, this biosensor exhibits excellent specificity and high reproducibility. Overall, these results demonstrate the great potential of these novel MPL-fabricated OSCM devices for a wide range of applications from flexible bioelectronics/biosensors, to nanoelectronics and organ-on-a-chip devices.