Related Experiment Video
Updated: Sep 7, 2025

Processing Embryo, Eggshell, and Fungal Culture for Scanning Electron Microscopy
Published on: August 16, 2019
Causation of cornflake artifacts: Possible association of poor dehydration with drying before mounting in
Kaori Okayama1, Yasuyoshi Ishii2, Masahiko Fujii2
1Department of Medical Technology, Faculty of Health Sciences, Gunma Paz University, Takasaki-shi, Japan.
Abstract:
Cornflake artifacts are artifacts that commonly occur while the mounted medium starts to evaporate before coverslipping. This study aimed to determine factors contributing to the occurrence of these artifacts in Papanicolaou (Pap) smears. Residual specimens were used after cytology to microscopically evaluate various effects on cornflake artifacts. Four SurePath™ liquid cytology (LBC) cell specimens, diagnosed as negative for intraepithelial lesions or malignancy (NILM), were used. Each LBC smear was subjected to Pap staining under four different conditions (A, without air-drying; B, air-drying after dehydration; C, air-drying after xylene immersion; and D, air-drying after dehydration and xylene immersion) using two methods: conventional and poor dehydration. Cornflake artifacts were not observed in A and B in Pap staining. By contrast, cornflake artifacts were observed in conventional and poor dehydration methods when dried after xylene immersion. When comparing the four conditions, smears B and D, which were both air-dried after dehydration, had fewer cornflake artifacts than smear C, which was air-dried only after xylene. Therefore, the remaining water in the cells due to poor dehydration during xylene immersion is found to result in the development of cornflake artifacts. The present study revealed that cornflake artifacts in Pap smears are caused by poor dehydration in addition to drying before mounting.
More Related Videos
Related Concept Videos
Fixation and Sectioning
The simplest type of preparation is the wet mount, in which the specimen is placed in a drop of liquid on the slide. A liquid specimen can be directly deposited on the slide using a dropper. Solid specimens, such as skin scraping, can be placed on the slide before adding a drop of liquid to prepare the wet mount. Sometimes the liquid is simply water, but stains are often added...
Preparation of Samples for Electron Microscopy

