Using sequential H₂O₂ addition to sustain 1,2-dichloroethane detoxification by a nanoscale zerovalent iron-induced...

1,2-dichloroethane (1,2-DCA) is a chlorinated hydrocarbon used for polyvinyl chloride plastic production. As such, 1,2-DCA is a common persistent contaminant in saturated zones. While nanoscale zerovalent iron (NZVI) is considered an effective reductant for removing a wide range of chlorinated hydrocarbons, 1,2-DCA is resistant to reduction by NZVI as well as by modified forms of NZVI (e.g., sulfidated-NZVI). Hydroxyl radicals produced in Fenton's reaction can effectively degrade 1,2-DCA, but Fenton's reaction requires the acidification of saturated zones to achieve a groundwater pH of 3 to facilitate the catalytic reaction. To overcome this problem, this study has developed a sequential treatment process using an NZVI-induced Fenton-like reaction that can effectively degrade 1,2-DCA at an initially neutral pH range. The experiments were conducted using a high 1,2-DCA concentration (2000 mg/L) to evaluate the feasibility of using the treatment process at source zones. The process degraded 99% of 1,2-DCA with a pseudo-first-order rate constant of 0.49 h^-1. Unlike the single-stage treatment process, the sequential treatment can control the used H₂O₂ concentration in the system, thus sustaining the reaction and resulting in more efficient 1,2-DCA degradation. To mimic subsurface conditions, batch experiments were conducted to remove 1,2-DCA sorbed in contaminated soil. The results show that 99% removal of 1,2-DCA was obtained within 16 h. Additionally, this study suggests that the NZVI can be used for at least three consecutive 1,2-DCA degradation cycles while maintaining high removal efficiency.