Thermal Debinding Kinetics of Gelcast Ceramic Parts via a Modified Independent Parallel Reaction Model in Comparison...

This work aims to provide useful insights into the thermal debinding kinetics of gelcast ceramic parts, especially for debinding kinetics prediction involving heat preservation. Debinding experiments were conducted in a differential thermogravimetric analyzer at five heating rates (5, 8, 10, 15, and 20 °C/min) in the temperature range of 35-900 °C under an air atmosphere. The conversion (α) and pyrolysis rate (dα/dT) data were simulated using a modified independent parallel reaction (IPR) model and a multiple normally distributed activation energy model (M-DAEM). Their validity was assessed and compared by checking the agreement between the experimental results and the prediction capability. The results showed that both the modified IPR model and M-DAEM had high predictability for thermal debinding kinetics under linear heating conditions. The fitting quality parameters (Fit) were less than 1.406 and 1.01%, respectively. The activation energies (E , i = 1, 2, 3, 4, and 5) calculated by the M-DAEM ranged from 153.312 to 217.171 kJ/mol. The relationships between E of pseudo components 1 to 5 calculated by the modified IPR model were a function of the conversion rate. The E values were E ₁(α) = 116.750 + 11.153α - 26.772α² + 4.362α³ kJ/mol, E ₂(α) = 139.595 - 66.162α + 75.702α² - 38.041α³ kJ/mol, E ₃(α) = 190.854 + 135.755α - 214.801α² + 116.093α³ kJ/mol, E ₄(α) = 64.068 + 280.086α - 380.270α² + 264.724α³ kJ/mol, and E ₅(α) = 188.257 - 77.086α + 74.129α² - 48.669α³ kJ/mol, respectively. However, it is noteworthy that the α and dα/dT curves predicted by the modified IPR model with a deviation of less than 8% were better than those predicted by the M-DAEM for the linear thermal debinding process with the holding stage. Accordingly, it is believed that the proposed modified IPR model is suitable for describing the thermal debinding kinetics involving the heat preservation of gelcast green parts.