Boronate-Affinity Cross-Linking-Based Ratiometric Electrochemical Detection of Glycoconjugates

Despite the widespread application of the boronate-affinity cross-linking (BAC) in the separation, enrichment, and sensing of glycoconjugates, it remains a huge challenge to integrate the BAC into the selective electrochemical detection of glycoconjugates due to the poor selectivity of the BAC. Herein, we demonstrate a BAC-based ratiometric electrochemical method for the simple, low-cost, and highly sensitive and selective detection of glycoconjugates. Briefly, the methylene blue (MB)-tagged nucleic acid aptamer is exploited as the recognition element to selectively capture target glycoconjugate, to which a large number of ferrocene (Fc) tags are subsequently labeled via the BAC between the phenylboronic acid (PBA) group and the cis-diol site of the oligosaccharide chains on the captured targets. Using the MB tag as the internal reference and the Fc tag as the reporter of the target capture, the dual-signal output enables the ratiometric detection. Due to the presence of a high density of the cis-diol sites on a glycoconjugate, sufficiently high sensitivity can be obtained even without using any amplification strategies. Using glycoprotein mucin 1 (MUC1) as the model target, the signal ratio (I_Fc/I_MB) exhibits good linearity over the range from 0.05 to 50 U/mL, with a detection limit of 0.021 U/mL. In addition to the high sensitivity and selectivity, the results of the analysis of MUC1 in serum samples are acceptable. By virtue of its simplicity, cost-effectiveness, and high robustness and reproducibility, this BAC-based ratiometric electrochemical method holds great promise in the highly sensitive and selective detection of glycoconjugates.