Crystallization of ropivacaine and bupivacaine when mixed with different adjuvants: a semiquantitative light...

Amino-amide local anesthetics precipitate when mixed with some commonly used adjuvants, carrying the risk of perineural or vascular crystal deposition. The aim of this study was to evaluate whether crystallization occurs with routinely used local anesthetic-adjuvant combinations and if a relation with the solution's pH exists.

All substances used in this trial were first visually investigated undiluted under tenfold magnification. Grade of crystallization was assessed using a 6 point grading system.Ropivacaine (0.2%, 0.75% and 1%) and bupivacaine (0.25% and 0.5%) were mixed in a 1:1 solution with the following adjuvants: dexamethasone, dexmedetomidine, clonidine, fentanyl, sodium bicarbonate 8.4% and sodium chloride 0.9%. Subsequently, ropivacaine (0.2% and 0.75%) and bupivacaine (0.25% and 0.5%) were mixed with adjuvants in concentrations commonly used in clinical practice and then serially assessed at several time points up to 1 hour. pH of all substances/combinations was assessed and correlated with crystallization grade.

All pure substances-except the reference standards sterile water and triamcinolon-showed crystallization grades ranging from grade 1 to grade 4. Addition of adjuvants lead to variable, unpredictable changes in crystal depositions. Addition of sodium bicarbonate 8.4% produced heavy crystallization in all combinations. Grade of crystallization was weakly positively related to the pH of the solution in 1:1 mixtures and clinically relevant concentrations, but not in pure substances.

Our study showed that crystallization is present in pure local anesthetics and may be increased or decreased by admixture of adjuvants. Higher pH of mixtures was weakly associated with more crystallization. Further research is necessary to translate these findings into clinical practice.