Development and microbial characterization of Bio-RD-PAOP for effective remediation of polychlorinated biphenyls

Polychlorinated biphenyls (PCBs) as typical halogenated persistent organic pollutants are widely distributed in natural environments, and can be enriched and magnified in organisms via food webs. It is consequently urgent and necessary to develop techniques to completely remove these persistent organohalides. In this study, we developed a process (Bio-RD-PAOP) by integrating microbial reductive dechlorination (Bio-RD) with subsequent persulfate activation and oxidation process (PAOP) for effective remediation of PCBs. Results showed the synergistic combination of advantages of Bio-RD and PAOP in dechlorination of higher-chlorinated PCBs and of PAOP in degradation/mineralization of lower-chlorinated PCBs, respectively. For the PAOP, both experimental evidences and theoretical calculations suggested that degradation rate and efficiency decreased with the increased PCB chlorine numbers. Relative to the Bio-RD and PAOP, Bio-RD-PAOP had significantly higher PCB removal efficiencies, of which values were PCB congener-specific. For example, removal efficiency of Bio-RD-PAOP in removing PCB88 is 2.50 and 1.86 times of that of Bio-RD and PAOP, respectively. In contrast, the efficiency is 1.66 and 3.35 times of Bio-RD and PAOP, respectively, for PCB180 removal. The PAOP-derived oxidizing species (mainly sulfate free radical) significantly decreased microbial abundance, particularly of the organohalide-respiring Dehalococcoides. Notably, co-existence of other microorganisms alleviated the inhibitive effect of oxidizing species on the Dehalococcoides, possibly due to formation of microbial flocs or biofilm. This study provided a promising strategy for extensive remediation of organohalide-contaminated sites, as well as new insight into impact of PAOP-derived oxidizing species on the organohalide-respiring community.