Related Experiment Video
Updated: Sep 6, 2025

Preparation of Aligned Steel Fiber Reinforced Cementitious Composite and Its Flexural Behavior
Published on: June 27, 2018
Numerical Model for Flexural Analysis of Precast Segmental Concrete Beam with Internal Unbonded CFRP Tendons
Wutong Yan1,2, Liangjiang Chen1, Bing Han2
1China Railway Economic and Planning Research Institute Co., Ltd., Beijing 100038, China.
Abstract:
A new construction scheme was recently developed for precast segmental concrete beams by replacing steel tendons with internal unbonded carbon-fiber-reinforced polymer tendons. The discontinuous behaviors of the opening joints and unbonded phenomenon of tendons made their flexural behaviors more complicated than those of monolithic beams and members with bonded tendons. Currently, the knowledge on the structural performance of precast segmental concrete beams with internal unbonded carbon-fiber-reinforced polymer tendons is still limited. An efficient numerical model is urgently needed for the structural analysis and performance evaluation of this new construction scheme. In this paper, a new beam-cable hybrid model was proposed accounting for the mechanical behaviors of open joints and unbonded tendons. The numerical model was implemented in the OpenSees software with the proposed modeling method for joint elements and a newly developed element class for internal unbonded tendons. The effectiveness of the proposed model was verified by comparisons against two simply supported experimental tests. Then, the numerical model was employed to evaluate the flexural performance of a full-scale bridge with a span of 37.5 m. Compared with the precast segmental concrete beam with external steel tendons, the scheme with internal unbonded carbon-fiber-reinforced polymer tendons significantly improved the flexural capacity and ductility by almost 54.6% and 8.9%, respectively. The span-to-depth ratio and prestressing reinforcement ratio were the main factors affecting the flexural behaviors. With the span-to-depth ratio increasing by 23%, the flexural capacity decreased by approximately 38.6% and the tendon stress increment decreased by approximately 15.7%. With the prestressing reinforcement ratio increasing by 65.4%, the flexural capacity increased by 88.7% and the tendon stress increment decreased by approximately 25.2%.
Related Concept Videos
Design of Prismatic Beams for Bending
Prismatic Beams: Problem Solving
The design begins with analyzing the beam as a free body to identify moments and force balances, thereby determining support reactions. Next, the...
Plastic Deformations
Fiber Reinforced Concrete
Internal Loadings in Structural Members: Problem Solving
To illustrate this, let's consider a beam OC of 5 kN, inclined at an angle of 53.13° with the horizontal and supported at both ends. Determine the internal...
Flexural Stress
Hooke's Law states that within the material's elastic limits, stress is directly proportional to strain. In a member experiencing a bending moment, the strain at any point is relative to...

